Ceiling Insulation Installation Richardson

Is it time for Ceiling Insulation Installation in Richardson? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.

Metal Building Insulation

One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.

Ceiling Insulation

When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.

Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.

Almost all Ceiling Insulation Installation in Richardson are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.

Shop Insulation

How to Insulate an Attic with Batts and Rolls

If you are told that your attic along with the roof are two of the weakest places in your thermal insulation system it is possible that many may not believe. According to statistics poor (or absent) attic insulation will account for up to 15 % of the total energy loss in your house. Insulating an attic which is generally unheated is vital in the home energy saving process.

What is really the attic in your building?

Attic is defined as the space enclosed by the building wall and is located directly under the roof. As this is an area generally not occupied continuously by anybody (except in special designs and home modifications) it is unheated. Some components of utilities such as water heaters, hot water storages, air conditioning and heating air ducts and also goods storages may be located here depending on the volume of space available. Generally the roof and the floor are insulated though more often than not inadequately.

Areas of heat loss in an attic

Some major points of heat loss have been identified by researchers. For example;

  • Check all hot water plumbing insulation and renew if necessary. Continuous insulation through out is essential. Check near the storage tanks for weak insulation and rectify as needed.
  • Hot/cold air ducts are easily neglected items in an unconditioned attic. Poor seals between flanged joints, weak insulation in these places and elsewhere, non continuity in insulation etc. may cause high thermal energy losses.
  • Another cause of heat loss from conditioned areas to the attic is the recessed light fittings. Caution should be exercised when insulating the fitting as this will also entrap the heat emitted by the lamp leading to disastrous fires. Seeking manufacturer's instruction is therefore essential in this matter.
  • Vent grilles to and unheated attic is essential for proper ventilation of the occupied areas. Special care need to be taken to prevent obstruction of these grilles (generally located at the periphery of the attic floor).
  • Expandable Foam Insulation

    Sealing and Insulating Your Attic Hatch

    What are the special installation types forspray foam that may not be typically obvious? What is very popular in California, especiallyin northern California, is wine tanks.

    All the tanks they store wine in.

    All of themare sprayed with two inches of spray foam.

    Wine tanks.

    Do you have any pictures?There is a huge market of it in northern California, and there is a market for it in Southern California.

    These types of things.

    Yeah.

    They get big.

    These look to be huge.

    Yeah.

    Like that.

    We spray the outside of thosethings.

    Right.

    So the outside wouldn't be silver likethat.

    It would have a layer.

    So what would you do exactly? What type of spray foam wouldyou use? You would first clean it, make sure all thedust is off it.

    Some might have what material it is.

    Some might require a primer.

    And thenyou actually spray roofing foam on it, because it just comes out a lot smoother which isusually a 2.

    8 density, 3 point density, and then you do two layers of elastomeric roofcoating just like basically a roof application.

    So sometimes they could be in a control environment.

    Presumably, you wouldn't need to do it if it's in a controlled environment, or wouldyou do it? No, no.

    You typically wouldn't do it, butthey would already have the environment already insulated.

    But this reminds me of though,is the building that this is in, these are typically called pole barns.

    The reason beingis that they're usually made out of metal.

    Metal siding and the wind picks up, it's veryloud and rattley.

    The pole structures they don't have any installation in there and.

    First unexpected applications for spray foam would be wine tanks.

    Presumably this wouldbe a manufacturing facility in a winery.

    They make wine in containers like these do they?Yes.

    Temecula's in southern California, that's about an hour and a half away from me.

    Thereis a lot of wineries out there.

    I just wouldn't have visualized the productionof wine in big tanks like that.

    It's just not intuitive.

    Well there's an unusual application.

    That's a good one.

    What else? Agriculture.

    Like for example in Idaho.

    It'sreally popular you know that they use pole bars are just screwed together with sheetmetal and steel, and sometimes wood.

    A lot of the farming communities would get awfullywindy and they just are loud and rattley.

    And this would tighten up all the sheet metal,sidings, and roofing.

    For a nice and quiet and comfortable inside.

    It blocks all the gaps and just strengthens the building overall structurally becauseit forms kind of solid coating.

    Exactly.

    Yeah.

    On these cold climate areas in California, horse farms.

    Where they don't want the horsesfreezing out there.

    So we've got wine tanks, whole barns, andhorse barns.

    And a lot of these barns, they put in areasfor the employees.

    They'll attach a little office to them.

    They need to be insulatedas well.

    So I imagine a big area.

    I mean these arejust basically like big hangers aren't they? So if they need to become controlled, I imaginethey're going to be very difficult to because this is such a big open area.

    The way they'reconstructed, I imagine they must be very difficult and very expensive to maintain a specificclimate in them.

    As long as they do spray foam it wouldn'tbe difficult.

    It seals everything up and all they need is two inches.

    Is there a way to define the insulation value that would be achieved in an installationlike this? You would get the 6.

    5 or 7 R value per inch.

    2 inches that would give you 14.

    So there's your R value.

    You then give them an equivalent of an R14 insulation.

    Is that what you are saying?Yes.

    So it doesn't sound like a lot.

    It's fact to the whole thing about spray foam is the air sealing.

    If you the minimum oftwo inches in there, the heat or the cold isn't going to pass that.

    You have that airbarrier in 2 inches closed-cell foam.

    The R value really isn't relevant.

    So it's stillnot going to penetrate it, because it has an air barrier.

    It's sealed tight,The reality then you're saying is that although it's theoretically an R14, the actual practicalbenefit of the insulation will be much greater than that.

    Yes.

    We're back to the performance than prescriptive.

    Prescriptive it's an R14.

    The performanceis much greater than that because it has air sealing.

    An air barrier in it.


    Roof Insulation Cost Texas