Is it time for Crawl Space Insulation Installation in Seagoville? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Crawl Space Insulation Installation in Seagoville are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
The Basics of Blown Attic Insulation
Do you have a newer home with a high R-Value insulation installed? Good for you! But there is still one more thing you can do to improve the energy efficiency of your home. A step that will actually decrease your bills even further: installing radiant barrier reflective foil insulation in your attic.
Once your home is completed by a builder there are still two to three places in your home that may possibly be leaking your energy resources: attic, garage and windows. Since the attic covers the entire home, I recommend it as the place to start if you want to further energy-proof your home.
It is best to use perforated radiant barrier insulation when installing in an attic. This allows the material to breathe and prevents unwanted moisture and condensation from developing.
The Importance of Cleaning Your Attic
One of the most common deficiencies on a Home Inspection Report is a poorly sealed and insulated attic hatch. You're probably thinking, why should I care about my attic hatch? A home loses about 25% of its heat through the top floor ceiling due to the effect of hot air rising. The attic hatch is a very large opening in that ceiling which accelerates this effect by allowing that rising air to escape the home. If you're lucky this only causes heat loss in the winter and brings attic heat into the home in the summer. If you're unlucky the humid air escaping will condense in the cold attic causing mold and even structural rot.
Installing Latches and Handles (Optional)
Fasten two handles to the inside of the hatch to assist in pulling it down against the weatherstripping. Install four latches on opposing sides of the hatch and trim so that when you pull down on the hatch they secure it against the compressed gasket.