Cavity Wall Insulation Installers Mesquite

Is it time for Loft Insulation Installers in Mesquite? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.

Roll Insulation

One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.

Radiant Barrier Insulation

When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.

Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.

Almost all Loft Insulation Installers in Mesquite are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.

Spray Foam Roof Insulation

The Purpose of Radiant Barrier Insulation

Radiant barriers are basically insulation devices used to maintain temperature of the surroundings. They are mainly composed of reflective aluminum sheets placed on substrate material. The substrates are made up of brown paper, craft paper, plastic films, cardboard, plywood sheathing or air infiltration barrier material.

There are two major types of radiant barriers i.e. Spray on and Sheet Barriers. Installation of spray on barriers is very simple. It is just sprayed on the underside of roof. It is made up of paint and metal flecking mixture. This mixture has enough reflective property to reflect the heat. Spray on barrier is durable. The sheet radiant barrier comes in the form of large roles. It can be installed by rolling out on the whole attic. You can roll it up on entire top insulation, hang it from rafter supports, nail it to bottom of the roof or roll it out underneath shingles.

During winters, solar energy is lost from the attic. Radiant barriers reduce this heat loss. They minimize the amount of energy radiated from the top surface of the insulation. However, solar heating of the roof may also result in loss of some beneficial heat gains. More research is currently underway to determine the affectivity of radiant barriers in winter season.

Discount Insulation

How Much Attic Insulation is Enough?

If you are told that your attic along with the roof are two of the weakest places in your thermal insulation system it is possible that many may not believe. According to statistics poor (or absent) attic insulation will account for up to 15 % of the total energy loss in your house. Insulating an attic which is generally unheated is vital in the home energy saving process.

What is really the attic in your building?

Attic is defined as the space enclosed by the building wall and is located directly under the roof. As this is an area generally not occupied continuously by anybody (except in special designs and home modifications) it is unheated. Some components of utilities such as water heaters, hot water storages, air conditioning and heating air ducts and also goods storages may be located here depending on the volume of space available. Generally the roof and the floor are insulated though more often than not inadequately.

Areas of heat loss in an attic

Some major points of heat loss have been identified by researchers. For example;

  • Check all hot water plumbing insulation and renew if necessary. Continuous insulation through out is essential. Check near the storage tanks for weak insulation and rectify as needed.
  • Hot/cold air ducts are easily neglected items in an unconditioned attic. Poor seals between flanged joints, weak insulation in these places and elsewhere, non continuity in insulation etc. may cause high thermal energy losses.
  • Another cause of heat loss from conditioned areas to the attic is the recessed light fittings. Caution should be exercised when insulating the fitting as this will also entrap the heat emitted by the lamp leading to disastrous fires. Seeking manufacturer's instruction is therefore essential in this matter.
  • Vent grilles to and unheated attic is essential for proper ventilation of the occupied areas. Special care need to be taken to prevent obstruction of these grilles (generally located at the periphery of the attic floor).

  • Roof Insulation Cost Texas