Is it time for Spray Foam Installers in Lake Dallas? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Spray Foam Installers in Lake Dallas are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
How to Evaluate the Types and Amount of Insulation
Spray Foam Insulation is a two-component system typically consisting of petroleum oils, plastics, and resins. The polyurethane foam comes in two different forms, open cell and closed cell foam. The polyurethane spray foam is an extremely versatile material that is available in a variety of final physical properties and densities. Although the two types of foam are very similar in their chemical structures their characteristics and capabilities differ in many ways, which makes it necessary for the user to understand the differences of the two materials so he or she can determine which is the right foam for their particular application.
The open cell spray foam insulation contains a density of 0.5lb. per cubic foot. The greater the density of the foam the heavier, or stronger it will become. This particular type of polyurethane foam is referred to as "Open Cell" because of the nature of the chemical reaction during the installation process. When the polyurethane foam is being applied the tiny cells of the foam are broken causing air to fill the "open" space inside the material, resulting in a soft or spongy material. The open cell foam carries an R-Value of 5 to 5.5 per inch (R-Value is the measure of thermal resistance, which can be found by identifying the ratio of the temperature difference across an insulator and the heat flux). 0.5lb. foam products use significantly less material than 2lb. foam products do when completing the same sized job, making them attractive to an individual concerned with conserving the foam material. Due to the fact that open cell foam requires less material, the cost of the project is much cheaper than it would be if you were to apply closed cell foam. Although, Open cell foam is an efficient and economical product it contains some disadvantages in regards to closed cell foam. One of the open cells disadvantages is it has a lower R-Valuer per square inch than closed cell foam does and open cell foam is vapor permeable requiring it to be covered with a vapor retardant material. Although, open cell foam has some advantages and disadvantages it has been recognized as an excellent insulator, air sealant and sound barrier.
There are many things a home or building owner should take into consideration when considering the type of foam that should be used for their particular application. Although both types of foam are by far the best insulators on the market, each type of polyurethane foam possess its own characteristics and capabilities. It is imperative for the user to identify which foam is right for them before applying the product.
R-Value Comparisons Between Different Types of Insulations
You've read all of the articles and know all the pro's and con's to the attic insulation called radiant barrier. Now what? You need to ask yourself two vital questions and they are:
1. Does my attic have ductwork?
2. What is the climate conditions in my area (hot, cold?)
3. What are the install methods of radiant barrier and which one should I use?
We're going to start by answering question number 3 first and tell you what the install methods of radiant barrier are.
The two prominent methods of installation are: stapling your reflective insulation to your roof rafters or just laying your reflective insulation over your previous traditional attic insulation. Each method has pro's and con's however, in order to make an informed decision you will need to answer question two.
However, if there is ductwork in the attic you may lean towards stapling the radiant barrier to your attics rafters. According the Department of Energy this is the optimal installation process in order to minimize summer heat gain and winter heat loss in the warmer climates. Though it is up for some debate on which method is better for energy savings.
It doesn't matter which install method you decide on. You will see energy savings with it. The staple-up method results in the minimum overall heat gain into your home. Both of these methods of installing radiant barrier is going to make your home feel more comfy and save you money on your utility bills.