Home Insulation Installers Hillsboro

Is it time for Crawl Space Insulation Installation in Hillsboro? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.

Sound Proof Insulation

One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.

Foam Insulation Board

When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.

Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.

Almost all Crawl Space Insulation Installation in Hillsboro are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.

Acoustic Insulation

Attic Insulation: Things You Need To Know

Is it time to insulate the attic? What is the best type to choose? Let us focus on two specific types. One is blown attic insulation the other is batt. Each type has pros and cons. However, which is the best choice for you. That is for you to decide, however we will provide information for you to make that decision.

If you are looking strictly at economics, then blown attic insulation is the best option you have. Another positive aspect of this type is that it is quite easy to install. There are typically two types of material used for this type. They are fiberglass and cellulose. Fiberglass is currently a more popular choice. The installation usually takes about one to two hours.

The R-factor of batt is a little better than blown attic insulation. The blown in thickness will cause variations in the R-factor for this type of insulation.

One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.

Radiant Barrier Insulation

R-Value Comparisons Between Different Types of Insulations

One of the most common deficiencies on a Home Inspection Report is a poorly sealed and insulated attic hatch. You're probably thinking, why should I care about my attic hatch? A home loses about 25% of its heat through the top floor ceiling due to the effect of hot air rising. The attic hatch is a very large opening in that ceiling which accelerates this effect by allowing that rising air to escape the home. If you're lucky this only causes heat loss in the winter and brings attic heat into the home in the summer. If you're unlucky the humid air escaping will condense in the cold attic causing mold and even structural rot.

Installing Latches and Handles (Optional)

Fasten two handles to the inside of the hatch to assist in pulling it down against the weatherstripping. Install four latches on opposing sides of the hatch and trim so that when you pull down on the hatch they secure it against the compressed gasket.


Roof Insulation Cost Texas