Is it time for Roof Insulation Installation in Duncanville? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Roof Insulation Installation in Duncanville are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
Is Spray Foam Insulation Efficient And Durable?
What are the special installation types forspray foam that may not be typically obvious? What is very popular in California, especiallyin northern California, is wine tanks.
All the tanks they store wine in.
All of themare sprayed with two inches of spray foam.
Do you have any pictures?There is a huge market of it in northern California, and there is a market for it in Southern California.
These types of things.
They get big.
These look to be huge.
We spray the outside of thosethings.
So the outside wouldn't be silver likethat.
It would have a layer.
So what would you do exactly? What type of spray foam wouldyou use? You would first clean it, make sure all thedust is off it.
Some might have what material it is.
Some might require a primer.
And thenyou actually spray roofing foam on it, because it just comes out a lot smoother which isusually a 2.
8 density, 3 point density, and then you do two layers of elastomeric roofcoating just like basically a roof application.
So sometimes they could be in a control environment.
Presumably, you wouldn't need to do it if it's in a controlled environment, or wouldyou do it? No, no.
You typically wouldn't do it, butthey would already have the environment already insulated.
But this reminds me of though,is the building that this is in, these are typically called pole barns.
The reason beingis that they're usually made out of metal.
Metal siding and the wind picks up, it's veryloud and rattley.
The pole structures they don't have any installation in there and.
First unexpected applications for spray foam would be wine tanks.
Presumably this wouldbe a manufacturing facility in a winery.
They make wine in containers like these do they?Yes.
Temecula's in southern California, that's about an hour and a half away from me.
Thereis a lot of wineries out there.
I just wouldn't have visualized the productionof wine in big tanks like that.
It's just not intuitive.
Well there's an unusual application.
That's a good one.
What else? Agriculture.
Like for example in Idaho.
It'sreally popular you know that they use pole bars are just screwed together with sheetmetal and steel, and sometimes wood.
A lot of the farming communities would get awfullywindy and they just are loud and rattley.
And this would tighten up all the sheet metal,sidings, and roofing.
For a nice and quiet and comfortable inside.
It blocks all the gaps and just strengthens the building overall structurally becauseit forms kind of solid coating.
On these cold climate areas in California, horse farms.
Where they don't want the horsesfreezing out there.
So we've got wine tanks, whole barns, andhorse barns.
And a lot of these barns, they put in areasfor the employees.
They'll attach a little office to them.
They need to be insulatedas well.
So I imagine a big area.
I mean these arejust basically like big hangers aren't they? So if they need to become controlled, I imaginethey're going to be very difficult to because this is such a big open area.
The way they'reconstructed, I imagine they must be very difficult and very expensive to maintain a specificclimate in them.
As long as they do spray foam it wouldn'tbe difficult.
It seals everything up and all they need is two inches.
Is there a way to define the insulation value that would be achieved in an installationlike this? You would get the 6.
5 or 7 R value per inch.
2 inches that would give you 14.
So there's your R value.
You then give them an equivalent of an R14 insulation.
Is that what you are saying?Yes.
So it doesn't sound like a lot.
It's fact to the whole thing about spray foam is the air sealing.
If you the minimum oftwo inches in there, the heat or the cold isn't going to pass that.
You have that airbarrier in 2 inches closed-cell foam.
The R value really isn't relevant.
So it's stillnot going to penetrate it, because it has an air barrier.
It's sealed tight,The reality then you're saying is that although it's theoretically an R14, the actual practicalbenefit of the insulation will be much greater than that.
We're back to the performance than prescriptive.
Prescriptive it's an R14.
The performanceis much greater than that because it has air sealing.
An air barrier in it.
Spray Foam Insulation Service
Radiant Barrier Insulation is a reflective insulation made mostly out of aluminum. There are lots of different types radiant barrier out there and they all have their specific applications. I know mostly about radiant barrier that is used to retrofit existing homes, specifically adding the insulation to the attic.
There are some radiant barrier types that are used in new constructions which are placed in the walls or under concrete etc but again, I'm focusing mainly on the addition of the material to an existing home on top of the existing attic insulation. When radiant barrier is rolled out on top o the existing attic insulation people can expect so see an average of 17% reduction in their heating and cooling costs.
Some people even claim as much as a 50% reduction in their monthly bills but that's more of an extreme case. The difference comes in how you use your electricity and/or natural gas. If you have an enormous house with giant vaulted ceilings and live in Arizona and like to keep your house at 65 degrees Fahrenheit during the summer then adding radiant barrier might actually save you 50% or so.
But if you have a really small house and you live in a moderate climate and most of your electricity is used for your 5 giant plasma TV's and you only turn the air conditioner on once or twice a summer, then you probably won't see that large of a reduction in your utilities bills. Whether or not you see a reduction in your utilities bills you will most certainly be able to maintain a comfortable temperature in your house much more easily than with only the standard mass insulation (fiberglass, cellulose, styrofoam etc).
The most cost effective way to install the radiant barrier insulation into your attic is to simply lay it on top of the existing insulation. If you're going to do this just make sure that you use material that allows water vapor to pass through it so you don't have any moisture condensation problems. And just follow the directions provided to you by the manufacturer. If the manufacturer doesn't provide instructions then you should choose a different manufacturer. If you're going to hire someone to do it then make sure they are bonded and insured so that if they fall through your roof you won't be stuck with the bill.