Is it time for Cost Of Loft Insulation in Dallas ? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Cost Of Loft Insulation in Dallas are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
R-Value Comparisons Between Different Types of Insulations
Are you considering insulating your home? You might be wondering what type of insulation would be the best fit for you. It is imperative to have the proper amount of insulation in your home. Insulation is rated in terms of thermal resistance often referred to as "R-value", which indicates the resistance to heat flow. The higher the R-value, the greater the effectiveness of the insulator will be. The R-value of the insulation depends on the type of material, its thickness and its density. The three most common types of insulation used in residential or commercial buildings are fiberglass batts, blown cellulose and polyurethane foam.
Fiberglass insulation is made from molten glass and recycled industrial waste. The fiberglass insulation carries an R-value of 3.14 per inch. Although, the fiberglass insulation is cheap there are many deficiencies with the product. Gaps tend to form between each fiberglass batt (known as bypasses) these gaps can become sites of air infiltration or condensation. Each of these deficiencies will reduce the effectiveness of the insulation resulting in a lowered R-value. A vapor barrier must be included in the installation of the fiberglass to prevent condensation and mold form growing. Fiberglass insulation is also hazardous to your health
Blown cellulose insulation is 100% natural and is made from recycled newspapers. The cellulose is treated with a flame retardant and insect repellent to prevent potential fire risks and wildlife infestations. Blown cellulose has an R-value of 3.70 per inch. Unlike fiberglass, Cellulose contains some moisture control characteristics, which prevents the accumulation of condensation and the growth of mold.
Another commonly used insulator in residential homes and commercial buildings is Polyurethane Foam, also referred to as "Spray Foam". The polyurethane foam comes in two different forms, open cell and closed cell. The open cell spray foam insulation is a low-density material. The open cell foam carries an R-Value of 5 to 5.5 per inch. The second type of polyurethane foam available is referred to as "closed-cell foam". Closed-Cell is a high-density foam carrying an R-value of 7.5 per inch. The closed cell foam is dense enough to improve the structural integrity of the building it is applied to. Some advantages of the Spray foam insulation include; air sealing in gaps and penetrations where blown cellulose and fiberglass bats cannot reach, the foam can fill wall cavities in finished walls, it can also act as a sound barrier and can increase the structural integrity of a building as well as provide its own vapor barrier. Spray foam insulation is the most efficient insulating product in the market today.
Exterior Wall Insulation Tips
Industries have decided to bring the best quality products and the most affordable insulation to home-owners across the county. Traditional materials made from fiberglass or cellulose can insulate the house but can damage the environment. Many such industries have decided to create quality products with the highest renewable resource content to encourage homeowners to purchase a product that protects the environment.
The Benefits of Spray Foam
Many contractors are using spray-on insulation, made of polyurethane froth, which is the same kind of appliance that manufacturers have used in refrigerators and water heaters. It can be used as an insulating and air sealing product for residential wall and ceiling cavities. The insulation is sprayed onto the wall cavities thereby expanding it. The liquid is sprayed through a nozzle into wall, ceiling, and floor cavities where it expands to fill every nook and cranny. Because it expands into tight areas, and its froth is ideal for insulating steel framing and outlets. This product can seal and fill tiny unseen cracks and seams, eliminating energy-wasting air filtration. Excess froth is scraped off the sides to form a uniform wall cavity. It makes it easy to completely fill wall cavities with insulation and to also perform air sealing. It is applied as a liquid which contains a polymer and a foaming agent.
The foam product also helps control moisture condensation because it does not shrink or settle. It is fire resistant and reduces heating and cooling costs significantly and its thermal seal keeps cold air in and unwanted air out. Spray on insulation has also been known to improve indoor air quality, thereby decreasing the likelihood of allergies. It also has high quality sound control, and significantly reduces dust, mold and mildew accumulation. Most importantly, the froth from the spray has been known to help the economy and the environment by using recycled materials in the froth. The containers are usually also recycled. Those who use this product are committed to providing quality renewable resource based building materials.
The Costs of Spray Foam Insulation
If an individual decides to get spray foam product, they must understand that the initial product costs may be higher than with traditional devices. But this foam product is not a do-it-yourself project and therefore homeowners will have to hire a contractor certified in applying this new technology. Since this is a fairly new product, there may not be many contractors in the area who can apply insulation. This is also a complicated and messy process, so it may be easier and more effective in new construction rather than existing homes. Furthermore, froth insulation in sidewalls may cause difficulties to contractors who are not familiar with its properties. The initial cost of using this foam product is about three times more than traditional materials. Even though it is more expensive, the insulation could lower your utility bill by as much as 30 percent, paying back the cost difference in energy savings in a few years from now.