Is it time for Insulation Cost in Keller? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Insulation Cost in Keller are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
Attic Insulation - Energy Savings
Radiant Barrier Insulation is a reflective insulation made mostly out of aluminum. There are lots of different types radiant barrier out there and they all have their specific applications. I know mostly about radiant barrier that is used to retrofit existing homes, specifically adding the insulation to the attic.
There are some radiant barrier types that are used in new constructions which are placed in the walls or under concrete etc but again, I'm focusing mainly on the addition of the material to an existing home on top of the existing attic insulation. When radiant barrier is rolled out on top o the existing attic insulation people can expect so see an average of 17% reduction in their heating and cooling costs.
Some people even claim as much as a 50% reduction in their monthly bills but that's more of an extreme case. The difference comes in how you use your electricity and/or natural gas. If you have an enormous house with giant vaulted ceilings and live in Arizona and like to keep your house at 65 degrees Fahrenheit during the summer then adding radiant barrier might actually save you 50% or so.
But if you have a really small house and you live in a moderate climate and most of your electricity is used for your 5 giant plasma TV's and you only turn the air conditioner on once or twice a summer, then you probably won't see that large of a reduction in your utilities bills. Whether or not you see a reduction in your utilities bills you will most certainly be able to maintain a comfortable temperature in your house much more easily than with only the standard mass insulation (fiberglass, cellulose, styrofoam etc).
The most cost effective way to install the radiant barrier insulation into your attic is to simply lay it on top of the existing insulation. If you're going to do this just make sure that you use material that allows water vapor to pass through it so you don't have any moisture condensation problems. And just follow the directions provided to you by the manufacturer. If the manufacturer doesn't provide instructions then you should choose a different manufacturer. If you're going to hire someone to do it then make sure they are bonded and insured so that if they fall through your roof you won't be stuck with the bill.
How To Remove Animals From The Attic
I have just completed an addition to my house. I've heard that blown in insulation is better than batts since covers the joists completely and leaves no open areas. Do you have any do it yourself suggestions?
Yes you are correct. Blown in insulation is better that batts when installed properly as it does seal the attic better.
First you need to measure your attic area that you plan on insulating. Most attics require a value of R-30, R-38 or R-49, depending on your climate and location. Once you know the square footage of your attic you can determine how much insulation you'll need by simple looking on the chart located on the bag of insulation.
Before you get started you will need to determine what materials you will need. Assuming your home has recessed lights, ceiling and bathroom fans and eave vents you will need the following tools and materials:
Loose Fill Insulation
Staple Hammer and Staples
Insulation Blowing Machine (Available at your local rental store)
I've found blowing insulation into the attic is a simple process. Start and the far ends of the attic. Going back and forth make sure its level and smooth. Make sure to get all areas of the attic and don't fill any vents or recessed light areas. Take a tape measure with you and check the levels once in a while. As an example, if your installing an R-38 of fiberglass insulation you would want it to measure 16 inches deep. As you work your way back near the attic access make sure your helper is getting that excess hose out of the way. When you get to about 6 feet from the access hole stop the machine so you can get on the ladder. Once on the ladder finish installing, making sure to bring the level evenly against the dam you previously built.
The final step is to place a piece of batt insulation in the access hole and carefully put the attic hole lid back into place. Now your done! Stay out of that attic as much as possible from this point as loose fill insulation that has been stepped on or crushed looses it's R value.