Ceiling Insulation Installation Richardson

Is it time for Ceiling Insulation Installation in Richardson? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.

Sheet Insulation

One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.

Pink Insulation

When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.

Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.

Almost all Ceiling Insulation Installation in Richardson are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.

Insulation Sheets

How do Radiant Barriers Work?

Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface. You can place the sheets directly over the top of existing attic insulation on the trusses, they should be over lapped to prevent any gaps where air and heat may be able to escape. You shouldn’t have the barrier insulation coming in contact with the attic insulation or it will transfer the heat right back, resulting in the heat going back into your home. There should be a dead air space in between the radiant barrier insulation for it to do its job properly. Radiant barrier insulation can also be attached right on your walls. For new homes this process is much easier of course, but it can be installed in an existing home as well. For an existing home, you’ll have to take off the drywall or board, so that the barrier insulation can be attached with the reflective side facing the dead air space. A lot more work, but also a lot more reward in terms of the energy savings you’ll see. The radiant barrier allows for the heat to be transferred up through wall to the attic, where it is dispersed through the venting. If you have an attic that does not have the proper venting installed, then chances are the radiant barrier insulation will not be able to work the way it was meant to. This can be rectified by installing some attic vents, or one or two attic fans. By having the proper venting in you attic, it will allow your attic to breath and help keep the water vapor from building up. If the water vapor becomes trapped in you attic, then this will cause major damage over time. Radiant barrier insulation can have a dramatic effect on your homes energy efficiency. A radiant barrier with an ‘R’ value of just 19 has been proven to equal that of regular insulation with a 30 ‘R’ value rating. A popular product is the UltraTouch Natural Cotton Radiant Barrier which is a lightweight, foil faced fire retardant blanket type insulation with multiple uses. Aluminum Insulation

Spray Foam Insulation Service

You've read all of the articles and know all the pro's and con's to the attic insulation called radiant barrier. Now what? You need to ask yourself two vital questions and they are:

1. Does my attic have ductwork?
2. What is the climate conditions in my area (hot, cold?)
3. What are the install methods of radiant barrier and which one should I use?

We're going to start by answering question number 3 first and tell you what the install methods of radiant barrier are.

The two prominent methods of installation are: stapling your reflective insulation to your roof rafters or just laying your reflective insulation over your previous traditional attic insulation. Each method has pro's and con's however, in order to make an informed decision you will need to answer question two.

However, if there is ductwork in the attic you may lean towards stapling the radiant barrier to your attics rafters. According the Department of Energy this is the optimal installation process in order to minimize summer heat gain and winter heat loss in the warmer climates. Though it is up for some debate on which method is better for energy savings.

It doesn't matter which install method you decide on. You will see energy savings with it. The staple-up method results in the minimum overall heat gain into your home. Both of these methods of installing radiant barrier is going to make your home feel more comfy and save you money on your utility bills.


Roof Insulation Cost Texas