Is it time for Spray Foam Installers in Haltom City? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Spray Foam Installers in Haltom City are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
Spray Foam Insulation Service
Are you considering insulating your home? You might be wondering what type of insulation would be the best fit for you. It is imperative to have the proper amount of insulation in your home. Insulation is rated in terms of thermal resistance often referred to as "R-value", which indicates the resistance to heat flow. The higher the R-value, the greater the effectiveness of the insulator will be. The R-value of the insulation depends on the type of material, its thickness and its density. The three most common types of insulation used in residential or commercial buildings are fiberglass batts, blown cellulose and polyurethane foam.
Fiberglass insulation is made from molten glass and recycled industrial waste. The fiberglass insulation carries an R-value of 3.14 per inch. Although, the fiberglass insulation is cheap there are many deficiencies with the product. Gaps tend to form between each fiberglass batt (known as bypasses) these gaps can become sites of air infiltration or condensation. Each of these deficiencies will reduce the effectiveness of the insulation resulting in a lowered R-value. A vapor barrier must be included in the installation of the fiberglass to prevent condensation and mold form growing. Fiberglass insulation is also hazardous to your health
Blown cellulose insulation is 100% natural and is made from recycled newspapers. The cellulose is treated with a flame retardant and insect repellent to prevent potential fire risks and wildlife infestations. Blown cellulose has an R-value of 3.70 per inch. Unlike fiberglass, Cellulose contains some moisture control characteristics, which prevents the accumulation of condensation and the growth of mold.
Another commonly used insulator in residential homes and commercial buildings is Polyurethane Foam, also referred to as "Spray Foam". The polyurethane foam comes in two different forms, open cell and closed cell. The open cell spray foam insulation is a low-density material. The open cell foam carries an R-Value of 5 to 5.5 per inch. The second type of polyurethane foam available is referred to as "closed-cell foam". Closed-Cell is a high-density foam carrying an R-value of 7.5 per inch. The closed cell foam is dense enough to improve the structural integrity of the building it is applied to. Some advantages of the Spray foam insulation include; air sealing in gaps and penetrations where blown cellulose and fiberglass bats cannot reach, the foam can fill wall cavities in finished walls, it can also act as a sound barrier and can increase the structural integrity of a building as well as provide its own vapor barrier. Spray foam insulation is the most efficient insulating product in the market today.
The Importance of Cleaning Your Attic
What is Spray Foam Insulation?:
It's a form of insulation, which is sprayed over an area you wish to insulate, instead of the conventional way of placing some sort of insulation in the wall cavity. When it is sprayed it rapidly expands and fills in every single void it can, creating an almost perfectly sealed space.
What are the advantages of using Spray Foam Insulation?:
By expanding and filling ever crack and void it provides complete sealing, preventing air from leaking, which is still in effect with other insulations. It can be placed in any area without having to remove existing tubing, electrical wires or pipes of any kind. It is water repellent and allows moisture to leave from the walls. Mold cannot grow on it. It also prevents the development of mold, which is due to humid air. It is an effective way of reducing outside noises. Also, Spray Foam Insulation has a low flammability. It can be used as an effective way of insulating your boat. It can be used in small areas.
Is it environmentally friendly?:
Many organizations have rated spray foam insulation as one of the greenest methods of insulation with the most attention going to icynene. Most spray foam insulations do not contain HCFC's, CFC's or formaldehyde. They are relatively safe for individuals with respiratory problems such as asthma. So the answer to the question is yes it is environmentally friendly.