Is it time for Home Insulation Installers in Fort Worth? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Home Insulation Installers in Fort Worth are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
How to Evaluate the Types and Amount of Insulation
One of the most common deficiencies on a Home Inspection Report is a poorly sealed and insulated attic hatch. You're probably thinking, why should I care about my attic hatch? A home loses about 25% of its heat through the top floor ceiling due to the effect of hot air rising. The attic hatch is a very large opening in that ceiling which accelerates this effect by allowing that rising air to escape the home. If you're lucky this only causes heat loss in the winter and brings attic heat into the home in the summer. If you're unlucky the humid air escaping will condense in the cold attic causing mold and even structural rot.
Installing Latches and Handles (Optional)
Fasten two handles to the inside of the hatch to assist in pulling it down against the weatherstripping. Install four latches on opposing sides of the hatch and trim so that when you pull down on the hatch they secure it against the compressed gasket.
Radiant Barrier Insulation Installation
There is a trend in the construction industry toward the use of spray foam insulation as opposed to the traditional pink roll batt or even cellulose varieties. With fuel costs rising all the time, it is becoming more important all the time to recognize and incorporate this important advancement in energy conservation and human comfort.
The second law of thermodynamics states that heat will always flow in one direction only, and that it will always flow from warm to cold. What that means to a home owner is that heat is always going to try to escape from the warm house to the cold outside, and that is why houses require insulation. One of the problems with traditional pink roll insulation is that it is installed and then stays in one place. Houses do actually move they settle and shift and expand and contract over time and are then not exactly the same as they were when they were built. Spray foam insulation expands and contracts with the structure, so the insulation seal is never broken.
Spray foam insulation costs far more than the traditional pink roll insulation or cellulose insulation; it is about triple the cost. However, statistics from over a year ago claim that spray foam insulation will save a home owner thirty nine percent on heating and cooling costs. Given what has happened to fuel costs in the last year, the thirty nine percent could turn out to be a very large amount of money.