Loft Insulation Installers Cedar Hill

Is it time for Spray Foam Installers in Cedar Hill? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.

Roll Insulation

One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.

Radiant Barrier Insulation

When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.

Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.

Almost all Spray Foam Installers in Cedar Hill are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.

Roll Insulation

Attic Insulation - Energy Savings

Reflective foil insulation, or ultra concrete barrier foil (Ultra CBF) are designed and manufactured for use directly under any poured concrete or cement slab. The design features of Ultra CBF are made so that no part of the reflective foil is in contact with the cement itself. It uses a unique laying system that consists of bubbles to ensure there is a dead air space between. The main difference between reflective foil insulation and regular foil insulation is with the regular foil it is made with a –foil/bubble/foil design-, while the reflective foil insulation is made with a patented –bubble/foil/bubble- process. This means that he foil layer of the reflective type is between the layers of the insulation. With traditional methods of insulating under concrete or cement slab use a two step process. First they incorporate a two inch foam panel, then a six mil. Clear plastic vapor barrier is installed. When you choose to use the reflective foil insulation, it has the vapor barrier already built right in, so not only are you saving the time and energy because you eliminate one step, you’re also saving money by using an all in one product. Reflective foil insulation is used for three main reasons, each one being very important in your homes efficiency. It creates a vapor barrier to keep the water from building up and getting into the floor itself. When this happens you’re in for a rather large repair bill. It also insulates the cement slab against the natural earth below. This is the best method to prevent heat loss. Reflective foil insulation also serves to create a radon barrier. Radon is the potentially lethal gases that come up through the ground; you can not smell or see this gas. By using the reflective foil insulation you eliminate the possibilities of this problem arising. The potential saving by using reflective foil insulation are many. By not using this type of insulation for under slab protection, you may be shooting yourself in the foot, in regards to the problems that can develop as mentioned above. Do it right the first time, and you home will be safer and much more energy efficient. Spray Foam Roofing

How do Radiant Barriers Work?

You've read all of the articles and know all the pro's and con's to the attic insulation called radiant barrier. Now what? You need to ask yourself two vital questions and they are:

1. Does my attic have ductwork?
2. What is the climate conditions in my area (hot, cold?)
3. What are the install methods of radiant barrier and which one should I use?

We're going to start by answering question number 3 first and tell you what the install methods of radiant barrier are.

The two prominent methods of installation are: stapling your reflective insulation to your roof rafters or just laying your reflective insulation over your previous traditional attic insulation. Each method has pro's and con's however, in order to make an informed decision you will need to answer question two.

However, if there is ductwork in the attic you may lean towards stapling the radiant barrier to your attics rafters. According the Department of Energy this is the optimal installation process in order to minimize summer heat gain and winter heat loss in the warmer climates. Though it is up for some debate on which method is better for energy savings.

It doesn't matter which install method you decide on. You will see energy savings with it. The staple-up method results in the minimum overall heat gain into your home. Both of these methods of installing radiant barrier is going to make your home feel more comfy and save you money on your utility bills.


Roof Insulation Cost Texas