Ceiling Insulation Installation Waxahachie

Is it time for Loft Insulation Installers in Waxahachie? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.

Spray Foam Roof Insulation

One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.

Spray Foam Roof Insulation

When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.

Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.

Almost all Loft Insulation Installers in Waxahachie are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.

Aluminum Insulation

What are the Different Types of Insulation?

If you are told that your attic along with the roof are two of the weakest places in your thermal insulation system it is possible that many may not believe. According to statistics poor (or absent) attic insulation will account for up to 15 % of the total energy loss in your house. Insulating an attic which is generally unheated is vital in the home energy saving process.

What is really the attic in your building?

Attic is defined as the space enclosed by the building wall and is located directly under the roof. As this is an area generally not occupied continuously by anybody (except in special designs and home modifications) it is unheated. Some components of utilities such as water heaters, hot water storages, air conditioning and heating air ducts and also goods storages may be located here depending on the volume of space available. Generally the roof and the floor are insulated though more often than not inadequately.

Areas of heat loss in an attic

Some major points of heat loss have been identified by researchers. For example;

  • Check all hot water plumbing insulation and renew if necessary. Continuous insulation through out is essential. Check near the storage tanks for weak insulation and rectify as needed.
  • Hot/cold air ducts are easily neglected items in an unconditioned attic. Poor seals between flanged joints, weak insulation in these places and elsewhere, non continuity in insulation etc. may cause high thermal energy losses.
  • Another cause of heat loss from conditioned areas to the attic is the recessed light fittings. Caution should be exercised when insulating the fitting as this will also entrap the heat emitted by the lamp leading to disastrous fires. Seeking manufacturer's instruction is therefore essential in this matter.
  • Vent grilles to and unheated attic is essential for proper ventilation of the occupied areas. Special care need to be taken to prevent obstruction of these grilles (generally located at the periphery of the attic floor).
  • Replacing Attic Insulation

    How To Remove Animals From The Attic

    Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface. You can place the sheets directly over the top of existing attic insulation on the trusses, they should be over lapped to prevent any gaps where air and heat may be able to escape. You shouldn’t have the barrier insulation coming in contact with the attic insulation or it will transfer the heat right back, resulting in the heat going back into your home. There should be a dead air space in between the radiant barrier insulation for it to do its job properly. Radiant barrier insulation can also be attached right on your walls. For new homes this process is much easier of course, but it can be installed in an existing home as well. For an existing home, you’ll have to take off the drywall or board, so that the barrier insulation can be attached with the reflective side facing the dead air space. A lot more work, but also a lot more reward in terms of the energy savings you’ll see. The radiant barrier allows for the heat to be transferred up through wall to the attic, where it is dispersed through the venting. If you have an attic that does not have the proper venting installed, then chances are the radiant barrier insulation will not be able to work the way it was meant to. This can be rectified by installing some attic vents, or one or two attic fans. By having the proper venting in you attic, it will allow your attic to breath and help keep the water vapor from building up. If the water vapor becomes trapped in you attic, then this will cause major damage over time. Radiant barrier insulation can have a dramatic effect on your homes energy efficiency. A radiant barrier with an ‘R’ value of just 19 has been proven to equal that of regular insulation with a 30 ‘R’ value rating. A popular product is the UltraTouch Natural Cotton Radiant Barrier which is a lightweight, foil faced fire retardant blanket type insulation with multiple uses.

    Roof Insulation Cost Texas