Is it time for Spray Foam Installers in Cedar Hill? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Spray Foam Installers in Cedar Hill are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
How to Clean Attic Mold - Attic Mold Remediation
There is a trend in the construction industry toward the use of spray foam insulation as opposed to the traditional pink roll batt or even cellulose varieties. With fuel costs rising all the time, it is becoming more important all the time to recognize and incorporate this important advancement in energy conservation and human comfort.
The second law of thermodynamics states that heat will always flow in one direction only, and that it will always flow from warm to cold. What that means to a home owner is that heat is always going to try to escape from the warm house to the cold outside, and that is why houses require insulation. One of the problems with traditional pink roll insulation is that it is installed and then stays in one place. Houses do actually move they settle and shift and expand and contract over time and are then not exactly the same as they were when they were built. Spray foam insulation expands and contracts with the structure, so the insulation seal is never broken.
Spray foam insulation costs far more than the traditional pink roll insulation or cellulose insulation; it is about triple the cost. However, statistics from over a year ago claim that spray foam insulation will save a home owner thirty nine percent on heating and cooling costs. Given what has happened to fuel costs in the last year, the thirty nine percent could turn out to be a very large amount of money.
Radiant Barrier Insulation
Adding insulation to your attic is a great way to save energy, but there are a number of choices that you need to sort through. What is the best type for your situation? What is the best location for this added insulation? How much should you add?
The first thing that you need to determine is how much insulation you already have. Measure the depth and determine the type. Then multiply the depth by the appropriate value: Cellulose: 3.1, Fiberglass Batt or Blown: 3.7, Closed-Cell Foam: 6.2, Open-Cell Foam: 3.6.
Before you move any further to insulate your attic, you should make sure that you have any knob and tube wiring in your attic that would be covered by insulation replaced. The wires in this type of system need to be in the open air in order to dissipate heat. If they are surrounded by insulation this will trap the heat and cause a fire hazard.
Once you have calculated the R-value of your insulation, you need to determine how much more you should add. Energy Starr has developed recommended levels of attic insulation for every Zone throughout the US. See map at Energy Star and chart below. However, what it boils down to is most houses don't have enough insulation. R-30 is the bare minimum and unless you live in south Florida, the recommended amount is twice that.
Radiant Barriers: work differently than thermal insulation. They reflect the heat away from the thermal insulation, instead of slowing the heat transfer through it. This effectively increases the performance of your thermal insulation in your attic by 50% to 70%. Radiant barriers work best if they are installed between the attic insulation and the roof sheathing, and when they are sloped so that dust will not accumulate on it as quickly. Furthermore, radiant barriers are fairly inexpensive and easy to install.
Your last step is to determine if you are going to add thermal insulation, a radiant barrier, or both. If your house already has what is the code minimum in many locations of R-30, adding a radiant barrier should boost its effectiveness to 45 or even 50. Or if you have an old house with 5 ½" of fiberglass or cellulose (R-17 to R-20) and you add another R-19 and a radiant barrier, you effective insulation value should be between 54 and 65.