Is it time for Crawl Space Insulation Installation in Seagoville? What is the best type to choose? Let us focus on four specific types. One is blown attic insulation the other is batt insulation. Each type has pros and cons. However, which is the best choice for you.
One of the best advantages of blown attic insulation over batt is that the blown style covers everything; while there can be open areas in the batt type.
When you’re looking to have your home or building insulated with spray foam insulation, you have a couple of product choices. Whether you go with closed foam or open foam insulation, the differences in their make will make a big difference in which one will work best for your needs.
Radiant barrier insulation has one reflective side that is made from an aluminum coating. Any radiant barrier insulation can be installed in an existing or new home. The reflective side of the barrier insulation is made to face the open air pocket of the surface.
Almost all Crawl Space Insulation Installation in Seagoville are tested and rated as fireproof. If for some strange reason you find one that is not, stay away from that product.
How To Install Blown In Attic Insulation
What are the special installation types forspray foam that may not be typically obvious? What is very popular in California, especiallyin northern California, is wine tanks.
All the tanks they store wine in.
All of themare sprayed with two inches of spray foam.
Do you have any pictures?There is a huge market of it in northern California, and there is a market for it in Southern California.
These types of things.
They get big.
These look to be huge.
We spray the outside of thosethings.
So the outside wouldn't be silver likethat.
It would have a layer.
So what would you do exactly? What type of spray foam wouldyou use? You would first clean it, make sure all thedust is off it.
Some might have what material it is.
Some might require a primer.
And thenyou actually spray roofing foam on it, because it just comes out a lot smoother which isusually a 2.
8 density, 3 point density, and then you do two layers of elastomeric roofcoating just like basically a roof application.
So sometimes they could be in a control environment.
Presumably, you wouldn't need to do it if it's in a controlled environment, or wouldyou do it? No, no.
You typically wouldn't do it, butthey would already have the environment already insulated.
But this reminds me of though,is the building that this is in, these are typically called pole barns.
The reason beingis that they're usually made out of metal.
Metal siding and the wind picks up, it's veryloud and rattley.
The pole structures they don't have any installation in there and.
First unexpected applications for spray foam would be wine tanks.
Presumably this wouldbe a manufacturing facility in a winery.
They make wine in containers like these do they?Yes.
Temecula's in southern California, that's about an hour and a half away from me.
Thereis a lot of wineries out there.
I just wouldn't have visualized the productionof wine in big tanks like that.
It's just not intuitive.
Well there's an unusual application.
That's a good one.
What else? Agriculture.
Like for example in Idaho.
It'sreally popular you know that they use pole bars are just screwed together with sheetmetal and steel, and sometimes wood.
A lot of the farming communities would get awfullywindy and they just are loud and rattley.
And this would tighten up all the sheet metal,sidings, and roofing.
For a nice and quiet and comfortable inside.
It blocks all the gaps and just strengthens the building overall structurally becauseit forms kind of solid coating.
On these cold climate areas in California, horse farms.
Where they don't want the horsesfreezing out there.
So we've got wine tanks, whole barns, andhorse barns.
And a lot of these barns, they put in areasfor the employees.
They'll attach a little office to them.
They need to be insulatedas well.
So I imagine a big area.
I mean these arejust basically like big hangers aren't they? So if they need to become controlled, I imaginethey're going to be very difficult to because this is such a big open area.
The way they'reconstructed, I imagine they must be very difficult and very expensive to maintain a specificclimate in them.
As long as they do spray foam it wouldn'tbe difficult.
It seals everything up and all they need is two inches.
Is there a way to define the insulation value that would be achieved in an installationlike this? You would get the 6.
5 or 7 R value per inch.
2 inches that would give you 14.
So there's your R value.
You then give them an equivalent of an R14 insulation.
Is that what you are saying?Yes.
So it doesn't sound like a lot.
It's fact to the whole thing about spray foam is the air sealing.
If you the minimum oftwo inches in there, the heat or the cold isn't going to pass that.
You have that airbarrier in 2 inches closed-cell foam.
The R value really isn't relevant.
So it's stillnot going to penetrate it, because it has an air barrier.
It's sealed tight,The reality then you're saying is that although it's theoretically an R14, the actual practicalbenefit of the insulation will be much greater than that.
We're back to the performance than prescriptive.
Prescriptive it's an R14.
The performanceis much greater than that because it has air sealing.
An air barrier in it.
Wall Foam Insulation
Are you considering insulating your home? You might be wondering what type of insulation would be the best fit for you. It is imperative to have the proper amount of insulation in your home. Insulation is rated in terms of thermal resistance often referred to as "R-value", which indicates the resistance to heat flow. The higher the R-value, the greater the effectiveness of the insulator will be. The R-value of the insulation depends on the type of material, its thickness and its density. The three most common types of insulation used in residential or commercial buildings are fiberglass batts, blown cellulose and polyurethane foam.
Fiberglass insulation is made from molten glass and recycled industrial waste. The fiberglass insulation carries an R-value of 3.14 per inch. Although, the fiberglass insulation is cheap there are many deficiencies with the product. Gaps tend to form between each fiberglass batt (known as bypasses) these gaps can become sites of air infiltration or condensation. Each of these deficiencies will reduce the effectiveness of the insulation resulting in a lowered R-value. A vapor barrier must be included in the installation of the fiberglass to prevent condensation and mold form growing. Fiberglass insulation is also hazardous to your health
Blown cellulose insulation is 100% natural and is made from recycled newspapers. The cellulose is treated with a flame retardant and insect repellent to prevent potential fire risks and wildlife infestations. Blown cellulose has an R-value of 3.70 per inch. Unlike fiberglass, Cellulose contains some moisture control characteristics, which prevents the accumulation of condensation and the growth of mold.
Another commonly used insulator in residential homes and commercial buildings is Polyurethane Foam, also referred to as "Spray Foam". The polyurethane foam comes in two different forms, open cell and closed cell. The open cell spray foam insulation is a low-density material. The open cell foam carries an R-Value of 5 to 5.5 per inch. The second type of polyurethane foam available is referred to as "closed-cell foam". Closed-Cell is a high-density foam carrying an R-value of 7.5 per inch. The closed cell foam is dense enough to improve the structural integrity of the building it is applied to. Some advantages of the Spray foam insulation include; air sealing in gaps and penetrations where blown cellulose and fiberglass bats cannot reach, the foam can fill wall cavities in finished walls, it can also act as a sound barrier and can increase the structural integrity of a building as well as provide its own vapor barrier. Spray foam insulation is the most efficient insulating product in the market today.